[Home] [Download] [Order] [Contact Us] 

List of Frequently Asked Questions

concerning Chronos

1.    "If I buy the Chrono Acupuncture software, how will I be informed of the updates? (History and Patches)"
2.   "When first running the Chrono-Acupuncture software, the following message appears: <<38: SHARE.EXE  non chargé/not loaded>> "
3.    "When decompressing the downloaded files, the following message appears: <<Disk Violation>> "
4.    "I cannot decompress" or "the installation asks for a diskette...":
5.    "The program screens are too large for my display monitor and some buttons are off screen."
6.   "May I install on another Drive than C:  ?"
7. "Is the Chrono Acupuncture software with both Windows 3.XX and Windows 95?"
8. "I have some ideas concerning the software of Chrono-Acupuncture"
 

If you want, you'll receive EMails periodically. At any time, you can download the last version of the software, it will work
without problem.
[Top]
 
 

 With Windows 3.11, you just need to edit the file  C:\WINDOWS\SYSTEM.INI (with NOTEPAD editor for instance) and
  add the following line in the [386Enh] section:
          DEVICE=VSHARE.386
 
 With Windows 95, this line becomes DEVICE=VSHARE.VXD
[Top]
 
 

  Same cause as in Question 4. Same remedy.
[Top]
 
 

1)  Exit Windows and rerun it. This will remove all the temporary files, close other applications...

2) If the problem still exists, this means the file is corrupted and need to be downloaded again.

3) If you have got the ChronosA.zip file, don't use old DOS Unzip utilities for decompressing. Use Winzip or Netzip
    instead.

4) If you have got the ChronosA.zip file, please decompress in a temporary directory, not in the final installation directory.

5) If you have downloaded ChronosA.exe file, read herebelow a message from InstallShield Corporation, concerning this
   problem: 

"The most common reason is that the target system's TEMP variable is set to a directory which:
- either is inaccessible (or unexistant)
- contains insufficient space for the setup files to be copied and decompressed.

Please check that your machine's TEMP directory:
- exists (otherwise:   create the C:\TMP directory and put the line SET TEMP=C:\TMP in AUTOEXEC.BAT file.)
- is not read-only
- is not located on a unavailable drive.

   If this repertory contains too many files, try moving or deleting a number of them, and then rerun the installation.
   If they cannot be removed, you have to exit Windows and rerun it.

   Also close all other running applications including the applications running in the background,  like screen savers and
   anti-virus programs."
[Top]
 
   

The resolution of your Display Monitor should be at least 800*600.

But this does not avoid your program to properly function, since all the command buttons can be pressed.

Anyway, you can move a window which is too big: clik on its header, maintain the left mouse button pressed and move your hand on the left: the hidden part will appear.

Here is the way to know what is your current resolution:
                   - Press the Start button of Window 95.
                   - In the list displayed, select Parameters
                   - In the window displayed, choose the icon Configuration Pannel.
                   - In the window displayed, choose the icon Display.
                   - In the screen displayed,   select the rightmost tab ("onglet"), called Configuration.
 
                   ==> In the new screen, look in the middle, on the right. What is written?
                            If it is 640x480, you have to choose 800x600 pixels, by pressing the bar.

 [Top]
 
 

 Yes.
 However, if you notice any problem, please contact us.
[Top]

 With Windows 95, 98 and Windows NT.

For Windows 3.xx, ask us a special version.
[Top]
 
 

Please, explain them to us.

If we think they may be useful to the Acupuncture Practitioners Community, we'll take them into account.
 [Top]
 
   Home Page